Basic Installation Guide
1. Dry Install
This is the proper installation process for who will apply the film to the substrates with compound curvatures. The film will be applied to the substrates directly without any preparation fluid or soap water.
2. Clean
Wash the car without any wax in advance. Clean the surface of the substrates with alcohol or proper solvent, where the film will be applied to.
3. Measure
Use the master pattern stencil to measure the part size. Cut around the film by an extra 10cm. Using tape or magnet could be helpful when fixing the film to the metal before applying.
4. Apply
Remove the liner carefully. Hold the film to make adjustment to the proper position to apply. Ensure that the glue is free of any dust or oil before applying. Choose the proper scraper to remove the air carefully from the middle to both sides with proper sequences. Avoid any wrinkles or creases while using the scraper. Choose a proper heat gun to heat the film to be thermoformable and more stretchable for some moderate compound curvatures. Avoid stretching the film too much, which will leave tension.
5. Moulding
Reserve the proper width on the edge and cut gently with a sharp knife. Fold or insert the film behind or under the parts. The proper primer and edge sealer are recommended for applying the film to moderate compound curvatures and edge areas. Avoid the wrinkles when you stretch the film behind certain parts.Cutting the film where needed will help to release the tension.
6. Check
Leave the car still for 24 hours, and check all details along with the edges. Use a knife to perforate the air bubbles. Use extra edge sealer or heat gun to refix the peeled off edges.
FAQS
Q. What are the benefits of vehicle wrapping?
A: Vehicle wrapping vinyl can be easily removed so that when you want to sell your vehicle you can simply restore it to its original color without losing value.
Q: How much does vehicle wrapping cost?
A: The cost depends on the size of vehicle being wrapped but for an average size car it is very less as compared to re-spray
Q: How long does a vehicle wrap last?
A: A professionally applied vehicle wrap will last up to 4 years.
Q: Is the vehicle wrap easy to remove?
A: Yes. The vehicle wrapping films are of high quality adhesives and can be easily removed within 5 years of the wrap being installed.
Q: Do I have to pay someone to remove the wrap?
A: No. It’s just simple instructions for removing the graphics yourself.
Q: Will vehicle wrapping damage the vehicle?
A: Applying specialist vehicle wrapping film to your vehicle will not damage your paintwork. However If you already have stone chips, abrasions or rust patches on your paintwork it’s important to remember that when the vinyl is removed it may pull loose paint off with it.
Q: Can I choose to wrap just part of my vehicle?
A: Vehicle wrapping is most effective when the whole vehicle is covered in a complete design, but you can chose to wrap just part of the vehicle, such as the rear doors or side panels.
The benefits of car vinyl wraps Increase Your Car’s Residual Value
Imagine driving your car for the next 3-4 years without causing normal day-to-day damage to its current paintwork finish.
With a Totally Dynamic vehicle colour change, this can happen as the wrap will protect your paintwork against stone chips and minor abrasions, helping to maintain the residual value of the vehicle
A quick and easy face-lift
Breathe new life into the appearance of your car by simply changing the colour. We have a standard range of over 100 colours in stock but if you are looking for a non-standard colour then our team of experts can colour match to your exact specifications.
Special effects
Vinyl car wraps can create so many more effects than a simple re-spray.
1. Dry Install
This is the proper installation process for who will apply the film to the substrates with compound curvatures. The film will be applied to the substrates directly without any preparation fluid or soap water.
2. Clean
Wash the car without any wax in advance. Clean the surface of the substrates with alcohol or proper solvent, where the film will be applied to.
3. Measure
Use the master pattern stencil to measure the part size. Cut around the film by an extra 10cm. Using tape or magnet could be helpful when fixing the film to the metal before applying.
4. Apply
Remove the liner carefully. Hold the film to make adjustment to the proper position to apply. Ensure that the glue is free of any dust or oil before applying. Choose the proper scraper to remove the air carefully from the middle to both sides with proper sequences. Avoid any wrinkles or creases while using the scraper. Choose a proper heat gun to heat the film to be thermoformable and more stretchable for some moderate compound curvatures. Avoid stretching the film too much, which will leave tension.
5. Moulding
Reserve the proper width on the edge and cut gently with a sharp knife. Fold or insert the film behind or under the parts. The proper primer and edge sealer are recommended for applying the film to moderate compound curvatures and edge areas. Avoid the wrinkles when you stretch the film behind certain parts.Cutting the film where needed will help to release the tension.
6. Check
Leave the car still for 24 hours, and check all details along with the edges. Use a knife to perforate the air bubbles. Use extra edge sealer or heat gun to refix the peeled off edges.
FAQS
Q. What are the benefits of vehicle wrapping?
A: Vehicle wrapping vinyl can be easily removed so that when you want to sell your vehicle you can simply restore it to its original color without losing value.
Q: How much does vehicle wrapping cost?
A: The cost depends on the size of vehicle being wrapped but for an average size car it is very less as compared to re-spray
Q: How long does a vehicle wrap last?
A: A professionally applied vehicle wrap will last up to 4 years.
Q: Is the vehicle wrap easy to remove?
A: Yes. The vehicle wrapping films are of high quality adhesives and can be easily removed within 5 years of the wrap being installed.
Q: Do I have to pay someone to remove the wrap?
A: No. It’s just simple instructions for removing the graphics yourself.
Q: Will vehicle wrapping damage the vehicle?
A: Applying specialist vehicle wrapping film to your vehicle will not damage your paintwork. However If you already have stone chips, abrasions or rust patches on your paintwork it’s important to remember that when the vinyl is removed it may pull loose paint off with it.
Q: Can I choose to wrap just part of my vehicle?
A: Vehicle wrapping is most effective when the whole vehicle is covered in a complete design, but you can chose to wrap just part of the vehicle, such as the rear doors or side panels.
The benefits of car vinyl wraps Increase Your Car’s Residual Value
Imagine driving your car for the next 3-4 years without causing normal day-to-day damage to its current paintwork finish.
With a Totally Dynamic vehicle colour change, this can happen as the wrap will protect your paintwork against stone chips and minor abrasions, helping to maintain the residual value of the vehicle
A quick and easy face-lift
Breathe new life into the appearance of your car by simply changing the colour. We have a standard range of over 100 colours in stock but if you are looking for a non-standard colour then our team of experts can colour match to your exact specifications.
Special effects
Vinyl car wraps can create so many more effects than a simple re-spray.